| поискавой системы для электроныых деталей |
|
PIC16F882-I датащи(PDF) 231 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F882-I датащи(HTML) 231 Page - Microchip Technology |
|
231 / 328 page ![]() © 2009 Microchip Technology Inc. DS41291F-page 229 PIC16F882/883/884/886/887 14.11 In-Circuit Debugger The PIC16F882/883/884/886/887-ICD can be used in any of the package types. The device will be mounted on the target application board, which in turn has a 3 or 4 wire connection to the ICD tool. When the debug bit in the Configuration Word (CONFIG<13>) is programmed to a ‘0’, the In-Circuit Debugger functionality is enabled. This function allows simple debugging functions when used with MPLAB® ICD 2. When the microcontroller has this feature enabled, some of the resources are not available for general use. See Table 14-9 for more detail. For more information, see “Using MPLAB® ICD 2” (DS51265), available on Microchip’s web site (www.microchip.com). 14.11.1 ICD PINOUT The devices in the PIC16F88X family carry the circuitry for the In-Circuit Debugger on-chip and on existing device pins. This eliminates the need for a separate die or package for the ICD device. The pinout for the ICD device is the same as the devices (see Section 1.0 “Device Overview” for complete pinout and pin descriptions). Table 14-9 shows the location and function of the ICD related pins on the 28 and 40 pin devices. TABLE 14-9: PIC16F883/884/886/887-ICD PIN DESCRIPTIONS Note: The user’s application must have the circuitry required to support ICD functionality. Once the ICD circuitry is enabled, normal device pin functions on RB6/ICSPCLK and RB7/ICSPDAT will not be usable. The ICD circuitry uses these pins for communication with the ICD2 external debugger. Pin (PDIP) Name Type Pull-up Description PIC16F884/887 PIC16F882/883/ 886 40 28 ICDDATA TTL — In-Circuit Debugger Bidirectional data 39 27 ICDCLK ST — In-Circuit Debugger Bidirectional clock 11 MCLR/VPP HV — Programming voltage 11,32 20 VDD P— 12,31 8,19 VSS P— Legend: TTL = TTL input buffer, ST = Schmitt Trigger input buffer, P = Power, HV = High Voltage |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |