AVxx16 Serie

www.aplusinc.com.tw

Page

/ 9

2002-Rev.2

2

9. Playing mode :EDGEL/LEVEL , HOLD/UNHOLD , RETRIGGER/IRRETRIGGER with following mask options :

EDGE/LEVEL

HOLD/UNHOLD

RETRIGGERING/IRRETRIGGER

A>EDGE

A>HOLD

A>IRRETRIGGER

B>LEVEL

B>UNHOLD

B>RETRIGGER

C>IO1(VDD-edge.GND-level)

C>IO1(VDD-hold,GND-unhold)

C>IO1(VDD-irretrigger,GND-retrigger)

D>IO2(VDD-edge.GND-level)

D>IO2(VDD-hold,GND-unhold)

D>IO2(VDD-irretrigger,GND-retrigger)

E>IO3(VDD-edge.GND-level)

E>IO3(VDD-hold,GND-unhold)

E>IO3(VDD-irretrigger,GND-retrigger)

C, D, E couldonlybe selected when IO1,IO2,IO3are mask_option as control input .

10. 3 I/O PINS WITH FOLLOWING OPTIONS:

* IO1

* IO2

* IO3

A>COUT B>STOPH C>STOPL

A>PWM1 B>STOPH

C>STOPL

A>PWM2

B>STOPH C>STOPL

D>BUSYH

E>BUSYL F>6HZ

D>BUSYH

E>BUSYL F>6HZ

D>BUSYH

E>BUSYL F>6HZ

G>DYNA1/4

H>DYN2/4

I>DYN3/4

G>DYNA1/4

H>DYN2/4

I>DYN3/4

G>DYNA1/4 H>DYN2/4

I>DYN3/4

J>USED AS CONTROL INPUT

J>USED AS CONTROL INPUT

J>USED AS CONTROL INPUT

Item_F : 0.75Hz or 1.5Hz or 3Hz or 6Hz(mask option)

Item_B~I : with one subtable enable status option for IO1, IO2, IO3.

COUT : 3 current output levels, with 4 mask options (1.5mA;3mA;4.5mA;IO3<GND-3mA,VDD-4.5mA>).

PWM1, PWM2 : must be selected on the same time ,direct driving buzzer or 8 or 32 or 64 ohm speaker.

STOPH, STOPL : 40 ms high/low output when device stop playing.(drive 1.8 mA,sink 10mA;3v).

BUSYH, BUSYL : high/low output during device playing (drive 1.8 mA,sink 10mA;3v).

6Hz/3Hz, DYNA1/4, 2/4, 3/4 : LED driving. (drive 1.8 mA, sink 10mA;3v)

Used as control input : internal pull GND (0.5uA,3V)

For all the IO options : the dynamic should choice same level.

If IO2 and IO3 are both at 6Hz(3Hz), they will flash alternatively.

When used as control input, they could be used to control following options by bonding or toggle switch.

EDGE/LEVEL, HOLD/UNHOLD, RETRIGGER/IRRETRIGGER, DEBOUNCE 10ms/50us

㆒般規格

:

AVH316B ,AVH316C ,AVH316D ,AV0716C ,AV0716D ,AV1416D ,AV2116A,AV2816A 乃㆒單晶片CMOS

VLSI語音合成器，它以LOGPCM編碼方式，合成長達3.5、7、14、21、28、42 秒之語音。藉由製造過程㆗更換

光罩，將客戶需要之語音資料編寫入

ROM㆗。

特性：

1. 單㆒工作電壓範圍為2.4 - 5 伏特。

2. 語音總長度可達3.5、7、14、21、28、42秒，且可被分割成16語音段(section)，每段長度可不

同。 每㆒語音段有㆕種不同播放時間的選擇，但是任何㆒種播放時間皆不可長於原段的

(語

音

+靜音)時間。