TCR2EF series, TCR2EE series

2012-12-11

6

Attention in Use

●

Output Capacitors

Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there might be

unexpected thermal features. Please consider application condition for selecting capacitors. And Toshiba

recommend the ESR of ceramic capacitor is under 10

Ω.

●

Mounting

The long distance between IC and output capacitor might affect phase assurance by impedance in wire and inductor.

For stable power supply, output capacitor need to mount near IC as much as possible. Also VIN and GND pattern

need to be large and make the wire impedance small as possible.

●

Permissible Loss

Please have enough design patterns for expected maximum permissible loss. And under consideration of

surrounding temperature, input voltage, and output current etc, we recommend proper dissipation ratings for

maximum permissible loss; in general maximum dissipation rating is 70 to 80 percent.

●

Overcurrent Protection Circuit

Overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising

device operation. If output pins and GND pins are shorted out, these products might be break down.

In use of these products, please read through and understand dissipation idea for absolute maximum ratings from

the above mention or our ‘Semiconductor Reliability Handbook’. Then use these products under absolute maximum

ratings in any condition. Furthermore, Toshiba recommend inserting failsafe system into the design.