SPE-12-8-080/B/RC

Page 2 of 11

1. INTRODUCTION

The ILA.02 has excellent stability and sensitivity to consistently provide high signal reception

efficiency, 60% at centre frequency and 60% at the edges. Based on the loop effect this antenna

works the best when placed on the centre of the edge of the board, working better than

traditional linear polarized chip antenna. The antenna at 10x3.2x0.5mm is low profile and would

be suitable for devices with space constraints. The ILA.02 is delivered on tape and reel and now

allows M2M customers to use an Omni-directional SMT antenna in devices where orientation of

the product is unknown. The ILA.02 Loop antenna can be used in automated meter reading,

(AMR), radio frequency identification (RFID), remote monitoring, healthcare, sensing and others.

2. SPECIFICATION

ELECTRICAL

ANTENNA

ILA.02

STANDARD

868 MHz ISM

Operation Frequency (MHz)

868-870 MHz

Polarization

Linear

Impedance

50 Ohms

Max VSWR

1.5:1

Max Return Loss (dB)

-17

Peak Gain

1 dBi

Efficiency (%)

50

Average Gain (dB)

-3

Radiation Properties

Omni-directional

Max Input Power

5 W

* The ILA01 antenna performance was measured with 80x40 mm ground plane.

MECHANICAL

Dimensions (mm)

10x3.2x0.5

Required Space (mm)

11x10.4

Material

Ceramic

EVB Connector

SMA-Female