AMMCL00XA datasheet(21/36 Pages) AMD

21 / 36 page

AmMCL00XA

PRELIMIN ARY

ABSOLUTE MAXIMUM RATINGS

Storage Temperature . . . . . . . . . . . . . –40

°C to +90°C

Ambient Temperature

with Power Applied . . . . . . . . . . . . . . –40

°C to +85°C

Voltage at All Pins (Note 1) . . . . –0.5 V to VCC+0.5 V

VCC (Note 1) . . . . . . . . . . . . . . . . . . . . –0.5 V to 3.6 V

Output Short Circuit Current (Note 2) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V. During

voltage transitions, inputs may overshoot VSS to –2.0 V

for periods of up to 20 ns. Maximum DC voltage on output

and I/O pins is VCC + 0.5 V. During voltage transitions,

outputs may overshoot to VCC + 2.0 V for periods up to

20ns.

2. No more than one output shorted at a time. Duration of

the short circuit should not be greater than one second.

Conditions equal VOUT = 0.5 V or 3.6 V, VCC = VCCmax.

These values are chosen to avoid test problems caused

by tester ground degradation. This parameter is sampled

and not 100% tested, but guaranteed by characterization.

3. Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device.

This is a stress rating only; functional operation of the de-

vice at these or any other conditions above those indi-

cated in the operational sections of this specification is

not implied. Exposure of the device to absolute maximum

rating conditions for extended periods may affect device

reliability.

OPERATING RANGES

Commercial Devices

Case Temperature (TC). . . . . . . . . . . . . .0°C to +70°C

Industrial (I) Devices

Case Temperature (TC). . . . . . . . . . . .–40°C to +85°C

VCC Supply Voltages

AmMCL00XAWP-150 . . . . . . . . . . . . +2.7 V to +3.6 V

Operating ranges define those limits between which the

functionality of the device is guaranteed.

AMMCL00XA датащи(PDF) 21 Page - Advanced Micro Devices