AM79C971VCW datasheet(27/265 Pages) AMD

27 / 265 page

Am79C971

the SFD (Start of Frame Delimiter) of a received frame.

Data on the RXD[3:0] will be the start of the destination

address field. SFBD will subsequently toggle every nib-

ble time (1.25 MHz frequency when operating at 10

Mbps and 12.5 MHz frequency when operating at 100

Mbps) indicating the first nibble of each subsequent

byte of the received nibble stream. The RX_CLK

should be used in conjunction with the SFBD to latch

the correct data for external address matching. SFBD

will be active only during frame reception.

Note: The SFBD pin is multiplexed with the EESK and

LED1 pins.

When RST is active, SFBD is an input for NAND tree

testing.

SRD

Serial Receive Data

Input/Output

SRD is the decoded NRZ data from the network. This

signal can be used for external address detection.

When the 10BASE-T port is selected, transitions on

SRD will only occur during receive activity. When the

AUI port is selected, transitions on SRD will occur dur-

ing both transmit and receive activity.

When the EADI is enabled (EADISEL, BCR2, bit 3) and

the Receive Frame Tagging is enabled (RXFRTG,

CSR7, bit 14) and the MII is selected, the SRD pin be-

comes a data input pin for the Receive Frame Tag (MI-

IRXFRTGD). See the Receive Frame Tagging section

for details.

Note: When the MII port is selected, SRD will not gen-

erate transitions and receive data must be derived from

the Media Independent Interface RXD[3:0] pins.

Note also that the SRD pin is multiplexed with the

EEDO and LED3 pins.

When RST is active, SRD is an input for NAND tree

testing.

SRDCLK

Serial Receive Data Clock

Input/Output

Serial Receive Data is synchronous with reference to

SRDCLK. When the 10BASE-T port is selected, transi-

tions on SRDCLK will only occur during receive activity.

When the AUI port is selected, transitions on SRDCLK

will occur during both transmit and receive activity.

When the EADI is enabled (EADISEL, BCR2, bit 3), the

Receive Frame Tagging is enabled (RXFRTG, CSR7,

bit 14), and the MII is selected, the SRDCLK pin be-

comes a data input enable pin for the Receive Frame

Tag (MIIRXFRTGE). See the Receive Frame Tagging

section for details.

Note: When the MII port is selected, SRDCLK will not

generate transitions and the receive clock must be de-

rived from the MII RX_CLK pin.

Note also that the SRDCLK pin is multiplexed with the

LED2 pin.

When RST is active, SRDCLK is an input for NAND

tree testing.

RXFRTGD

Receive Frame Tag Data

Input

When the EADI is enabled (EADISEL, BCR2, bit 3), the

Receive Frame Tagging is enabled (RXFRTG, CSR7,

bit 14), and the MII is not selected, the RXFRTGD pin

becomes a data input pin for the Receive Frame Tag.

See the Receive Frame Tagging section for details.

Note: The RXFRTGD pin is multiplexed with the

RXD[0] pin.

When RST is active, RXFRTGD is an input for NAND

tree testing.

RXFRTGE

Receive Frame Tag Enable

Input

When the EADI is enabled (EADISEL, BCR2, bit 3), the

Receive Frame Tagging is enabled (RXFRTG, CSR7,

bit 14), and the MII is not selected, the RXFRTGE pin

becomes a data input enable pin for the Receive Frame

Tag. See the Receive Frame Tagging section for de-

tails.

Note: The RXFRTGE pin is multiplexed with the

RX_DV pin.

When RST is active, RXFRTGE is an input for NAND

tree testing.

MIIRXFRTGD

MII Receive Frame Tag Enable

Input/Output

When the EADI is enabled (EADISEL, BCR2, bit 3), the

Receive Frame Tagging is enabled (RXFRTG, CSR7,

bit 14), and the MII is selected, the MIIRXFRTGD pin

becomes a data input pin for the Receive Frame Tag.

See the Receive Frame Tagging section for details.

Note: The MIIRXFRTGD pin is multiplexed with the

SRD pin.

When RST is active, MIIRXFRTGD is an input for

NAND tree testing.

MIIRXFRTGE

MII Receive Frame Tag Enable

Input/Output

When the EADI is enabled (EADISEL, BCR2, bit 3), the

Receive Frame Tagging is enabled (RXFRTG, CSR7,

bit 14), and the MII is selected, the MIIRXFRTGE pin

becomes a data input enable pin for the Receive Frame

Tag. See the Receive Frame Tagging section for de-

tails.

Note: The MIIRXFRTGE pin is multiplexed with the

SRDCLK pin.

AM79C971VCW датащи(PDF) 27 Page - Advanced Micro Devices

AM79C971VCW датащи(HTML) 27 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL