Software

Enables fast and easy communication between a Windows PC and your oscilloscope using USB or LAN. Transfer and save

settings, waveforms, measurements, and screen images. Included Word and Excel toolbars automate the transfer of acquisition

data and screen images from the oscilloscope into Word and Excel for quick reporting or further analysis.

IVI driver

Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI,

Microsoft .NET, and MATLAB.

control

Enables control of the oscilloscope over a network connection through a standard web browser. Simply enter the IP address or

network name of the oscilloscope and a web page will be served to the browser.

Display system

Display type

7 inch (180 mm) wide format liquid crystal TFT color display.

Display resolution

480 horizontal × 234 vertical pixels (WQVGA).

Waveform styles

Vectors, Dots, Variable Persistence, Infinite Persistence.

Graticules

Full, Grid, Cross Hair, Frame.

Format

YT and XY.

Maximum waveform capture rate

Up to 5,000 wfm/s.

Input/output ports

USB 2.0 high-speed host port

Supports USB mass storage devices, printers, and keyboards. One port available on rear panel and one on front panel.

USB 2.0 high-speed device port

Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488, and direct

LAN port (Ethernet)

RJ-45 connector, supports 10/100BASE-T (requires DPO2CONN).

Video out port

DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector (requires DPO2CONN).

Auxiliary input

Probe compensator output voltage

and frequency

Front-panel pins

Amplitude

5 V

Frequency

1 kHz

Kensington-style lock

Rear-panel security slot connects to standard Kensington-style lock.

Power source

Power source voltage

100 to 240 V ±10%

Power source frequency

45 to 65 Hz (90 to 264 V)

360 to 440 Hz (100 to 132 V)

Power consumption

80 W maximum

Output voltage

12 V

Output current

5 A

Power consumption

50 W

2

Required when total oscilloscope probe power usage exceeds 20 W.

Datasheet

12 www.tektronix.com