MP2116 datasheet(2/13 Pages) MPS

2 / 13 page

MP2116 –2A, 6V, 100% DUTY CYCLE SYNCHROOUS STEP-DOWN CONVERTER WITH 0.5A LDO

MP2116 Rev.1.0

www.MonolithicPower.com

1/17/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication

ORDERING INFORMATION

Part Number*

Package

Top Marking

Temperature

MP2116DQ

QFN10

(3mm x 3mm)

–40

°C to +85°C

For Tape & Reel, add suffix –Z (eg. MP2116DQ–Z)

For Lead Free, add suffix –LF (EG. MP2116DQ–LF–Z)

PACKAGE REFERENCE

ABSOLUTE MAXIMUM RATINGS (1)

IN1, OUT1/2 to GND..................–0.3V to + 6.5V

IN2 to GND .........................–0.3V to VIN1 + 0.3V

SW1 to GND .......................–0.3V to VIN1 + 0.3V

...........(-2.5V<VSW1<+8.5V Transient <50ns)

PWROK to GND .........................–0.3V to +6.5V

FB1/2, EN1/2 to GND .................–0.3V to +6.5V

Operating Temperature............. –40°C to +85°C

Continuous Power Dissipation

(TA = +25°C)

(2)

……………………………………………….2.5W

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Storage Temperature ............. –65°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN1............................2.5V to 6V

Supply Voltage VIN2.......................... 1.0V to VIN1

Output Voltage VOUT__ ........................0.6V to 6V

Operating Temperature............. –40°C to +85°C

Thermal Resistance

(4)

θJA

θJC

QFN10 (3mm x 3mm) .............50 ...... 12 ...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-

TA)/ θJA. Exceeding the maximum allowable power dissipation

will cause excessive die temperature, and the regulator will go

into thermal shutdown. Internal thermal shutdown circuitry

protects the device from permanent damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on approximately 1” square of 1 oz copper.

MP2116 датащи(PDF) 2 Page - Monolithic Power Systems

MP2116 датащи(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13

датащи скачать

ссылки URL