MP2016 datasheet(2/10 Pages) MPS

2 / 10 page

MP2016 – 42V, 30mA, LOW POWER, LINEAR REGULATOR

MP2016 Rev.1.0

www.MonolithicPower.com

10/10/2011

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

Free Air Temperature (TA)

MP2016DJ*

TSOT23-5

|R2

-40

°C to +85°C

MP2016DD**

QFN-8 (2 x 3mm)

-40

°C to +85°C

* For Tape & Reel, add suffix –Z (g. MP2016DJ–Z).

For RoHS compliant packaging, add suffix –LF (e.g. MP2016DJ–LF–Z)

** For Tape & Reel, add suffix –Z (g. MP2016DD–Z).

For RoHS compliant packaging, add suffix –LF (e.g. MP2016DD–LF–Z)

PACKAGE REFERENCE

TOP VIEW

N/C

VIN

GND

SHDN

N/C

OUT

N/C

EXPOSED PAD

ON BACKSIDE

CONNECTED TO

GROUND PLAN

TSOT23-5

QFN-8 (2mm x 3mm)

ABSOLUTE MAXIMUM RATINGS

(1)

IN , SHDN ....................................–0.3V to +45V

GND..................................... –0.3V to VIN + 0.3V

FB .............................................–0.3V to + 1.5V

Continuous Power Dissipation (TA = +25°C)

(2)

TSOT23-5………………………………...0.6.W

QFN8 (2X3mm)………………………….2.3W

Lead Temperature ....................................260

°C

Storage Temperature.............. –65°C to +150

°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ..............................4V to 42V

Output Voltage VOUT.........................1.2V to 40V

Maximum Junction Temp. (TJ) ................+125°C

Thermal Resistance

(4)

θJA

θJC

TSOT23-5 ..............................220 .... 110 ..

°C/W

QFN8 (2 x 3mm) .....................55 ...... 12 ...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP2016 датащи(PDF) 2 Page - Monolithic Power Systems

MP2016 датащи(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10

датащи скачать

ссылки URL