LMH6702QML

www.ti.com

SNOSAQ2E – JULY 2005 – REVISED MARCH 2013

LMH6702 Electrical Characteristics DC Parameters

(1) (2)

The following conditions apply, unless otherwise specified.

Sub-

Symbol

Parameter

Conditions

Notes

Min

Max

Unit

groups

Input Bias Current, Noninverting

-15

+15

μA

1, 2

-21

+21

μA

3

Input Bias Current, Iverting

-30

+30

μA

1, 2

-34

+34

μA

3

Input Offset Voltage

-4.5

+4.5

mV

1, 3

-6.0

+6.0

mV

2

Supply Current, no load

15

mA

1, 2, 3

PSSR

Power Supply Rejection Ratio

45

dB

1, 2, 3

(1)

The algebraic convention, whereby the most negative value is a minimum and most positive is a maximum, is used in this table.

Negative cur rent shall be defined as convential current flow out of a device terminal.

(2)

Pre and Post irradiation limits are identical to those listed under the DC parameter tables above. Post irradiation testing is conducted at

room temperature, +25°C, only. Testing is performed as specified in MIL-STD-883 Test Method 1019 Condition A. The ELDRS-Free part

is also tested per Test Method 1019 Conditions D.

LMH6702 Electrical Characteristics AC Parameters

(1) (2)

The following conditions apply, unless otherwise specified.

Sub-

Symbol

Parameter

Conditions

Notes

Min

Max

Unit

groups

3rd Harmonic Distortion

-62

dBc

4

GFPL

Gain Flatness Peaking

0.4

dB

4

GFPH

Gain Flatness Peaking

2.0

dB

4

GFRH

Gain Flatness Rolloff

0.2

dB

4

2nd Harmonic Distortion

-52

dBc

4

(1)

The algebraic convention, whereby the most negative value is a minimum and most positive is a maximum, is used in this table.

Negative cur rent shall be defined as convential current flow out of a device terminal.

(2)

These parameters are not post irradiation tested.

Copyright © 2005–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: LMH6702QML