SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

Dimensions in Inches

(controlling dimensions)

Dimensions in Millimeters

(for reference only)

PACKAGE DESIGNATOR ‘UA’

NOTES: 1.

Tolerances on package height and width represent

allowable mold offsets. Dimensions given are

measured at the widest point (parting line).

2.

Exact body and lead configuration at vendor’s option

within limits shown.

3.

Height does not include mold gate flash.

4.

Recommended minimum PWB hole diameter to clear

transition area is 0.035" (0.89 mm).

5.

Where no tolerance is specified, dimension is nominal.

6.

Supplied in bulk pack (500 pieces per bag).

Dwg. MH-014E in

0.164

0.159

0.062

0.058

0.0173

0.0138

0.050

BSC

45

°

0.640

0.600

0.0189

0.0142

0.085

MAX

45

°

0.031

123

0.122

0.117

SEE NOTE

Dwg. MH-014E mm

4.17

4.04

1.57

1.47

0.44

0.35

1.27

BSC

45

°

16.26

15.24

0.48

0.36

2.16

MAX

45

°

0.79

123

3.10

2.97

SEE NOTE

Radial Lead Form (order A314xxUA-LC)

NOTE:

Lead-form dimensions are the nominals produced on the

forming equipment. No dimensional tolerance is implied or

guaranteed for bulk packaging (500 pieces per bag).

0.620"

0.500"

(15.7 mm

12.7 mm)

0.100"

(2.5 mm)

Dwg. MH-026

0.108"

(2.74 mm)

123