33461 datasheet(8/60 Pages) MACOM

8 / 60 page

SOLISTRAND, Budget and DIAMOND GRIP

Uninsulated Terminals and Splices

Catalog 65505

Revised 9-00

For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.

Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.

Specifications subject to change. Consult AMP for latest specifications.

The SOLISTRAND Terminal

SOLISTRAND terminals and splices are

specially designed to terminate solid and

stranded wire, irregular shaped conduc-

tors, and combinations of these — still

retaining the superior performance char-

acteristics of single-purpose terminals

and splices. Because AMP matches the

terminal to the tool each termination is

uniformly perfect, making quality control

easy and performance consistent.

Corrosion resistance, vibration resis-

tance and tensile strength of these termi-

nals and splices are well within the lim-

its of commercial and military specifica-

tions. The SOLISTRAND line includes

parallel and butt splices, and flag, ring,

spade, hooked, and flanged tongue ter-

minals in sizes from 26 AWG [0.1 mm2]

through 600 MCM [304 mm2].

The Crimp

The “W” Crimp is one of several time-

proven crimp types developed by AMP.

It is not just a “kink” in a metal barrel;

not something pinched over electrical

wire ends. The “W” Crimp is actually two

longitudinal crimps applied with pre-

cisely controlled pressure so that the

conductor within the barrel flows togeth-

er into the dimples or serrations of the

terminal barrel creating one homoge-

neous mass of metal. The two indents

also help to center conductors within the

barrel for uniform crimping of the barrel

around the wire. Furthermore, the “W”

Crimp permits the use of a shorter termi-

nal barrel, an excellent feature for con-

fined area termination.

The “W” Crimp creates terminations of

optimum electrical properties and is

completely reliable, giving long service

in punishing environments.

BASIC TERMINAL MATERIAL. The

basic terminal is constructed of fine

grade high conductivity copper per

ASTM B-152 and tin-plated per

MIL-T-10727. Basic material for

Spring Spade Tongue Terminals is

phosphor bronze per ASTM B-103

and tin-plated per MIL-T-10727.

AMP’s special plating process cre-

ates durable corrosion resistance to

salt spray and most chemical

fumes.

DIMPLES OR SERRATIONS. Inner

surface either dimpled or serrated

for optimum tensile strength and

maximum electrical contact area

after crimping.

BELL MOUTH. Bell shape of barrel

entrance makes insertion of wires

easier.

SOLISTRAND Terminals meet or

exceed the requirements of

MIL-T-7928, Type I, Class 1 and 2.

Temperature Rating: 170°C Max.

AMP SOLISTRAND Terminals and Splices

(Use SOLISTRAND Tooling)

AMP Inc.

Listed

LR 7189

Wire Size

File No. E13288

Certified

22–16

Solid or Stranded

16–14

Solid or Stranded

16–14 Heavy Duty

Solid or Stranded

Stranded

Solid or Stranded

14–12

Solid or Stranded

Stranded

Solid or Stranded

12–10

Solid or Stranded

Stranded

Solid or Stranded

8 thru 600 MCM

Solid or Stranded

Stranded

Solid or Stranded

Note: 22-16 terminals and splices are stamped 22-18 in accordance with

MIL-T-7928. Commercial wire range is 22-16.

DANGER: Not to be used on aluminum wire — may cause equipment

failure leading to serious injury or death.

“W” Crimp

One Solid

Two Solid

One Stranded

One Solid

Two Stranded

BRAZED SEAM. The barrel is

completely closed and seam is

brazed for uniform metal strength

around the entire barrel area.

33461 датащи(PDF) 8 Page - Tyco Electronics

33461 датащи(HTML) 8 Page - Tyco Electronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

датащи скачать

ссылки URL