3G5A2-RPT01-E datasheet(69/182 Pages) OMRON

поискавой системы для электроныых деталей

3G5A2-RPT01-E датащи(PDF) 69 Page - Omron Electronics LLC

69 / 182 page

Use round crimp terminals for wiring. Do not connect bare stranded wires direct-

ly to terminal blocks. Use M3.5 screws for tightening crimp terminals.

7 mm max.

Caution

Tighten the screws on the terminal block of the AC Power Supply Unit to a torque

of 0.8 N

S m. The loose screws may result in short-circuit, burning, or malfunc-

tion.

M3.5 screw

Tightening torque: 0.8 N

S m

20 mm max.

WARNING Always attach crimp terminals to the wires to ensure proper connection.

Connecting loose wires can cause fires.

Caution

Abide by the following precautions when wiring the Power Supply Units. Failure

to abide by these precautions my cause faulty operation or damage to the Unit.

• Be sure that no wire clippings or other foreign materials enter the Units when

wiring.

• Check and recheck all wiring before supplying power to the system.

Note The RUN output on Slave Racks will go OFF when a remote I/O error occurs.

Power Supply Units

Section 3-4

Вашему бизинису помогли Аллдатащит? [ DONATE ]
Что такое Аллдатащит \| реклама \| контакт \| Конфиденциальность \| Ссылка на техническое описание \| обмен ссыками \| поиск по производителю All Rights Reserved©Alldatasheet.com
Mirror Sites English : Alldatasheet.com \| English : Alldatasheet.net \| Chinese : Alldatasheetcn.com \| German : Alldatasheetde.com \| Japanese : Alldatasheet.jp Russian : Alldatasheetru.com \| Korean : Alldatasheet.co.kr \| Spanish : Alldatasheet.es \| French : Alldatasheet.fr \| Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com \| Polish : Alldatasheet.pl \| Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in \| Mexican : Alldatasheet.com.mx \| British : Alldatasheet.co.uk \| New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com \| icmetro.com

Вашему бизинису помогли Аллдатащит? [ DONATE ]

Family Site : ic2ic.com | icmetro.com