MCP453X_13 datasheet(39/102 Pages) MICROCHIP

39 / 102 page

 2008-2013 Microchip Technology Inc.

DS22096B-page 39

MCP453X/455X/463X/465X

5.0

RESISTOR NETWORK

The Resistor Network has either 7-bit or 8-bit

resolution. Each Resistor Network allows zero scale to

full-scale connections. Figure 5-1 shows a block

diagram for the resistive network of a device.

The Resistor Network is made up of several parts.

These include:

• Resistor Ladder

•Wiper

• Shutdown (Terminal Connections)

Devices have either one or two resistor networks,

These are referred to as Pot 0 and Pot 1.

FIGURE 5-1:

Resistor Block Diagram.

5.1

Resistor Ladder Module

The resistor ladder is a series of equal value resistors

(RS) with a connection point (tap) between the two

resistors. The total number of resistors in the series

(ladder)

determines

the

RAB

resistance

(see

Figure 5-1). The end points of the resistor ladder are

connected to analog switches, which are connected to

the device Terminal A and Terminal B pins. The RAB

(and RS) resistance has small variations over voltage

and temperature.

For an 8-bit device, there are 256 resistors in a string

between terminal A and terminal B. The wiper can be

set to tap onto any of these 256 resistors, thus provid-

ing 257 possible settings (including terminal A and ter-

minal B).

For a 7-bit device, there are 128 resistors in a string

between terminal A and terminal B. The wiper can be

set to tap onto any of these 128 resistors, thus provid-

ing 129 possible settings (including terminal A and ter-

minal B).

Equation 5-1 shows the calculation for the step

resistance.

EQUATION 5-1:

RS CALCULATION

256

255

254

(1)

(01h)

Analog Mux

(1)

(00h)

(1)

(FEh)

(1)

(FFh)

(1) (100h)

Note 1: The wiper resistance is dependent on

several factors including, wiper code,

device VDD, Terminal voltages (on A, B,

and W), and temperature.

Also for the same conditions, each tap

selection resistance has a small variation.

This RW variation has greater effects on

some specifications (such as INL) for the

smaller

resistance

devices

(5.0 k

)

compared to larger resistance devices

(100.0 k

).

RAB

8-Bit

N =

128

127

126

(01h)

(00h)

(7Eh)

(7Fh)

(80h)

7-Bit

N =

256



-------------

128



--------------

8-bit Device

7-bit Device

MCP453X датащи(PDF) 39 Page - Microchip Technology

MCP453X датащи(HTML) 39 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL