References, PCB Layout, and Bill of Materials

www.ti.com

3. Connect the USB-A cable plug to an available port on the PC and the Micro-B plug to the Debug USB

port on the board.

4. Verify that the POWER LED D4 on the board is lit.

5. Run the LM Flash Programmer program.

6. In the Configuration tab, use the Quick Set control to select the Tiva C Series LaunchPad evaluation

board.

7. Move to the Program tab and click the Browse button. Navigate to the example applications directory

(the default location is C:\ti\TivaWare_C_Series_<version>/examples\boards\ek-tm4c123gxl-senshub\).

8. Each example application has its own directory. Navigate to the example directory that you want to

load, then navigate to the directory that contains the binary (*.bin) files. Select the desired binary file

and click Open.

9. Set the Erase Method to Erase Necessary Pages. Check the Verify After Program box, and check

the Reset MCU After Program option.

10. Click the Program button to start the Erase, Download, and Verify process. Program execution starts

once the Verify process is complete.

4

References, PCB Layout, and Bill of Materials

Complete schematics for the Sensor Hub BoosterPack are appended to this user's guide.

4.1

References

In addition to this document, the following references are available for download at www.ti.com:

•

BOOSTXL-SENSHUB BoosterPack Getting Started Guide (literature number SPMU295)

•

Tiva C Series TM4C123GH6PM Microcontroller Data Sheet (literature number SPMS376).

•

TivaWare for C Series Driver Library. Available for download at www.ti.com/tool/sw-tm4c-drl.

•

TivaWare for C Series Driver Library User’s Manual (literature number SPMU298).

•

TPS75118 Fast Transient Response, 1.5-A, Low-Dropout Regulator Data Sheet (literature number

SLVS241)

•

TMP006 Infrared Thermopile Sensor Data Sheet (literature number SBOS518)

•

Texas Instruments’ Code Composer Studio IDE website: www.ti.com/ccs

Additional support:

•

RealView MDK (www.keil.com/arm/rvmdkkit.asp)

•

IAR Embedded Workbench (www.iar.com)

•

Sourcery CodeBench development tools (www.codesourcery.com/gnu_toolchains/arm)

•

InvenSense MPU9150 (www.invensense.com/mems/gyro/mpu9150.html)

•

Intersil ISL29023 (www.intersil.com/en/products/optoelectronics/ambient-light-sensors/light-to-digital-

sensors/ISL29023.html)

•

Bosch BMP180 (www.bosch-

sensortec.com/homepage/products_3/environmental_sensors_1/bmp180_1/bmp180)

•

Sensirion SHT21 (www.sensirion.com/en/products/humidity-temperature/humidity-sensor-sht21)

6

BOOSTXL-SENSHUB Sensor Hub BoosterPack

SPMU290 – April 2013

Submit Documentation Feedback

Copyright © 2013, Texas Instruments Incorporated