2

AM3933P

Analog Power

May, 2005 - Rev. A

PRELIMINARY

Publication Order Number:

DS-AM3933_B

Notes

a.

Pulse test: PW <= 300us duty cycle <= 2%.

b.

Guaranteed by design, not subject to production testing.

Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty,

representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of

the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential

or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different

applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products

are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal

injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall

indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such

unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an

Equal Opportunity/Affirmative Action Employer.

Min

Typ

Max

Gate-Threshold Voltage

-1.00

Gate-Body Leakage

±100

nA

-1

-10

On-State Drain Current

A

-3

A

0.130

0.190

Forward Tranconductance

A

3

S

Diode Forward Voltage

-0.70

V

Total Gate Charge

6.0

Gate-Source Charge

0.80

Gate-Drain Charge

1.30

Input Capacitance

451

Output Capacitance

130

Reverse Transfer Capacitance

33

Turn-On Delay Time

6.5

Rise Time

20

Turn-Off Delay Time

31

Fall-Time

21

ns

Drain-Source On-Resistance

A

Dynamic

b

nC

Ω

pF

o

C UNLESS OTHERWISE NOTED)

uA

Zero Gate Voltage Drain Current

Static

Test Conditions

Symbol

Parameter

Limits

Unit