CW20P-Type

Advance Data Sheet, Rev. 1

CW Tunable, Wavelength-Stabilized Laser Module

June 2001

4

Agere Systems Inc.

1. Output power definitions and measurement per ITU-T Recommendation G.957.

2. Ratio of the average output power in the dominant longitudinal mode to the power in the most significant side mode under fully

modulated conditions.

Qualification and Reliability

To help ensure high product reliability and customer satisfaction, Agere Systems is committed to an intensive qual-

ity program that starts in the design phase and proceeds through the manufacturing process. Optoelectronics mod-

ules are qualified to Agere Systems internal standards using MIL-STD-883 test methods and procedures and using

sampling techniques consistent with

the intent of

design, development, and manufacturing facility has been certified to be in full compliance with the latest

9001 Quality System Standards.

Laser Safety Information

Class IIIb Laser Product

All versions of the CW20P-type modules are classified as Class IIIb laser products per FDA/CDRH, 21 CFR 1040

Laser Safety requirements. The device will be classified with the FDA under an accession number to be deter-

mined.

This product complies with 21 CFR 1040.10 and 1040.11.

8

µm/125 µm diameter single-mode fiber pigtail with 914 µm tight-buffered jacket and connector.

Product is not shipped with power supply.

Caution: Use of controls, adjustments, and procedures other than those specified herein may result in

hazardous laser radiation exposure.

Table 3. Optical Characteristics

Parameter

Symbol

Min

Typ

Max

Unit

13.0

—

—

dBm

Output Power Variation (BOL)

∆P

–0.5

—

0.5

dB

Frequency Drift

–2.5

—

2.5

GHz

Center Wavelength Range (See Table 6.)

1528.77

—

1610.53

nm

SMSR

32

—

—

dB

DANGER

INVISIBLE LASER RADIATION

IS EMITTED FROM THE END

OF FIBER OR CONNECTOR

Avoid direct exposure to beam

Do not view beam directly with

optical instruments

INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR

Avoid exposure to beam

Class IIIb Laser Product FDA/CDRH, 21 CFR 1040

Max. Output: 40 mW

Wavelength: 1.5

µm