22

Rev. 01

Rev. 01

September 2012

September 2012

WWW.SEOULSEMICON.COM

WWW.SEOULSEMICON.COM

서식번호 : SSC-QP-7-07-18 (Rev.00)

• Storage

To avoid the moisture penetration, we recommend storing Acriche Power LEDs in a dry box

with a desiccant . The recommended storage temperature range is 5C to 30C and a maximum

humidity of 70%.

• Use Precaution after Opening the Packaging

Pay attention to the following:

a. Soldering should be done immediately after opening the package (within 24Hrs).

b. Required conditions after opening the package

- Sealing

- Temperature : 5 ~ 40℃ Humidity : less than 50%

c. If the package has been opened more than 1 week or the color of the desiccant changes,

components should be dried for 10-12hr at 60±5℃

• Do not apply mechanical force or excess vibration during the cooling process to normal

temperature after soldering.

• Do not rapidly cool device after soldering.

• Components should not be mounted on warped (non coplanar) portion of PCB.

• Radioactive exposure is not considered for the products listed here in.

• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.

When washing is required, IPA (Isopropyl Alcohol) should be used.

• When the LEDs are in operation the maximum current should be decided after measuring the

package temperature.

• LEDs must be stored properly to maintain the device. If the LEDs are stored for 3 months or

more after being shipped from SSC, a sealed container with vaccum atmosphere should be used

for storage.

• The appearance and specifications of the product may be modified for improvement without

notice.

• Long time exposure of sunlight or occasional UV exposure will cause silicone discoloration.

• Attaching LEDs, do not use adhesives that outgas organic vapor.

Precaution for use