| поискавой системы для электроныых деталей |
|
AD9772A датащи(PDF) 1 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9772A датащи(HTML) 1 Page - Analog Devices |
|
1 / 32 page ![]() REV. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. a AD9772A One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 © Analog Devices, Inc., 2002 14-Bit, 160 MSPS TxDAC+® with 2 Interpolation Filter FUNCTIONAL BLOCK DIAGRAM 14-BIT DAC 2 FIR INTER- POLATION FILTER EDGE- TRIGGERED LATCHES CLOCK DISTRIBUTION AND MODE SELECT 2 /4 MUX CONTROL FILTER CONTROL 1 /2 1 PLL CLOCK MULTIPLIER +1.2V REFERENCE AND CONTROL AMP AD9772A CLKCOM CLKVDD MOD0 MOD1 RESET PLLLOCK DIV0 DIV1 CLK+ CLK– DATA INPUTS (DB13... DB0) SLEEP DCOM DVDD ACOM AVDD REFLO PLLCOM LPF PLLVDD IOUTA IOUTB REFIO FSADJ ZERO STUFF MUX FEATURES Single 3.0 V to 3.6 V Supply 14-Bit DAC Resolution and Input Data Width 160 MSPS Input Data Rate 67.5 MHz Reconstruction Passband @ 160 MSPS 74 dBc SFDR @ 25 MHz 2 Interpolation Filter with High- or Low-Pass Response 73 dB Image Rejection with 0.005 dB Passband Ripple “Zero-Stuffing” Option for Enhanced Direct IF Performance Internal 2 /4 Clock Multiplier 250 mW Power Dissipation; 13 mW with Power-Down Mode 48-Lead LQFP Package APPLICATIONS Communication Transmit Channel W-CDMA Base Stations, Multicarrier Base Stations, Direct IF Synthesis, Wideband Cable Systems Instrumentation PRODUCT DESCRIPTION The AD9772A is a single-supply, oversampling, 14-bit digital- to-analog converter (DAC) optimized for baseband or IF waveform reconstruction applications requiring exceptional dynamic range. Manufactured on an advanced CMOS process, it integrates a complete, low distortion 14-bit DAC with a 2 digital interpolation filter and clock multiplier. The on-chip PLL clock multiplier provides all the necessary clocks for the digital filter and the 14-bit DAC. A flexible differential clock input allows for a single-ended or differential clock driver for optimum jitter performance. For baseband applications, the 2 digital interpolation filter provides a low-pass response, hence providing up to a threefold reduction in the complexity of the analog reconstruction filter. It does so by multiplying the input data rate by a factor of two while simultaneously suppressing the original upper in-band image by more than 73 dB. For direct IF applications, the 2 digital interpolation filter response can be reconfigured to select the upper in-band image (i.e., high-pass response) while suppress- ing the original baseband image. To increase the signal level of the higher IF images and their passband flatness in direct IF applications, the AD9772A also features a “zero stuffing” option in which the data following the 2 interpolation filter is upsampled by a factor of two by inserting midscale data samples. The AD9772A can reconstruct full-scale waveforms with band- widths as high as 67.5 MHz while operating at an input data rate of 160 MSPS. The 14-bit DAC provides differential current outputs to support differential or single-ended applications. A segmented current source architecture is combined with a proprietary switching technique to reduce spurious components and enhance dynamic performance. Matching between the two current outputs ensures enhanced dynamic performance in a differential output configuration. The differential current outputs may be fed into a transformer or a differential op amp topology to obtain a single- ended output voltage using an appropriate resistive load. The on-chip bandgap reference and control amplifier are config- ured for maximum accuracy and flexibility. The AD9772A can be driven by the on-chip reference or by a variety of external reference voltages. The full-scale current of the AD9772A can be adjusted over a 2 mA to 20 mA range, thus providing addi- tional gain ranging capabilities. The AD9772A is available in a 48-lead LQFP package and specified for operation over the industrial temperature range of –40 °C to +85°C. PRODUCT HIGHLIGHTS 1. A flexible, low power 2 interpolation filter supporting reconstruction bandwidths of up to 67.5 MHz can be config- ured for a low- or high-pass response with 73 dB of image rejection for traditional baseband or direct IF applications. 2. A “zero-stuffing” option enhances direct IF applications. 3. A low glitch, fast settling 14-bit DAC provides exceptional dynamic range for both baseband and direct IF waveform reconstruction applications. 4. The AD9772A digital interface, consisting of edge- triggered latches and a flexible differential or single-ended clock input, can support input data rates up to 160 MSPS. 5. On-chip PLL clock multiplier generates all of the inter- nal high-speed clocks required by the interpolation filter and DAC. 6. The current output(s) of the AD9772A can easily be config- ured for various single-ended or differential circuit topologies. TxDAC+ is a registered trademark of Analog Devices, Inc. |
Аналогичный номер детали - AD9772A |
|
Аналогичное описание - AD9772A |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |