MPXV4115V

Sensors

2

Freescale Semiconductor, Inc.

Pressure

Operating Characteristics

required to meet electrical specifications.)

Characteristic

Symbol

Min

Typ

Max

Unit

Pressure Range (Differential mode, Vacuum on metal cap side, Atmospheric

pressure on back side)

–115

—

0

kPa

1. Device is ratiometric within this specified excitation range.

4.75

5.0

5.25

Vdc

Supply Current

—6.0

10

mAdc

(0 to 85

C)

2. Full Scale Output is defined as the output voltage at the maximum or full-rated pressure.

4.535

4.6

4.665

Vdc

(0 to 85

C)

3. Full Scale Span is defined as the algebraic difference between the output voltage at full-rated pressure and the output voltage at the

minimum-rated pressure.

—4.4

—

Vdc

(0 to 85

C)

4. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span

at 25°C due to all sources of errors, including the following:

Linearity:

Output deviation from a straight line relationship with pressure over the specified pressure range.

Temperature Hysteresis:

Output deviation at any temperature within the operating temperature range, after the temperature is cycled to

and from the minimum or maximum operating temperature points, with zero differential pressure applied.

Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from minimum

or maximum rated pressure at 25°C.

TcSpan:

Output deviation over the temperature range of 0° to 85°C, relative to 25°C.

TcOffset:

Output deviation with minimum pressure applied, over the temperature range of 0° to 85°C, relative to 25°C.

——

—

1.5%

Sensitivity

V/P

—

38.26

—

mV/kPa

5. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a

specified step change in pressure.

—1.0

—

ms

Output Source Current at Full Scale Output

—0.1

—

mAdc

6. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.

——

20

—

ms

7. Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

——

0.5

—