AD2S105AP datasheet(3/12 Pages) AD

3 / 12 page

Parameter

Min

Typ

Max

Units

Conditions

HOMOPOLAR OUTPUT

HPOP–OUTPUT

VOH

4V dc

IOH = 0.5 mA

VOL

1V dc

IOL = 0.5 mA

HPREF–REFERENCE

0.5

V dc

Homopolar Output-Internal

ISOURCE = 25 µA and 20 kΩ to AGND

POWER SUPPLY

VDD

4.75

5.25

V dc

VSS

–5.25

–5

–4.75

V dc

IDD

Quiescent Current

ISS

Quiescent Current

AD2S105

REV. 0

–3–

NOTES

1Angular accuracy includes offset and gain errors, measured with a stationary digital input and maximum analog frequency inputs.

2The angular error does not include the additional error caused by the phase delay as a function of input frequency. For example, if f

INPUT = 600 Hz, the contribution

to the error due to phase delay is: 650 ns

× f

INPUT × 60 × 360 = 8.4 arc minutes.

3Output subject to input voltage and gain.

Specifications subject to change without notice.

WARNING!

ESD SENSITIVE DEVICE

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the AD2S105 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

RECOMMENDED OPERATING CONDITIONS

Power Supply Voltage (+VDD, –VSS) . . . . . . . . .

±5 V dc ± 5%

Analog Input Voltage (PH/IP1, 2, 3, 4) . . . . . . 2 V rms

± 10%

Analog Input Voltage (PH/IPH1, 2, 3) . . . . . . 3 V rms

± 10%

Ambient Operating Temperature Range

Industrial (AP) . . . . . . . . . . . . . . . . . . . . . . . –40

°C to +85°C

ABSOLUTE MAXIMUM RATINGS

(TA = +25°C)

VDD to AGND . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V dc

VSS to AGND . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –7 V dc

AGND to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . .

±0.3 V dc

Analog Input Voltage to AGND . . . . . . . . . . . . . . . VSS to VDD

Digital Input Voltage to DGND . . . . –0.3 V to VDD + 0.3 V dc

Digital Output Voltage to DGND . . . . . . –0.3 V to VDD + V dc

Analog Output Voltage to AGND

. . . . . . . . . . . . . . . . . . . . . . VSS – 0.3 V to VDD + 0.3 V dc

Analog Output Load Condition (PH/OP1, 4

Sin

θ, Cosθ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 kΩ

Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 mW

Operating Temperature

Industrial (AP) . . . . . . . . . . . . . . . . . . . . . . . –40

°C to +85°C

Storage Temperature . . . . . . . . . . . . . . . . . –65

°C to +150°C

Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . . +300

°C

CAUTION

1. Absolute Maximum Ratings are those values beyond which

damage to the device will occur.

2. Correct polarity voltages must be maintained on the +VDD

and –VSS pins

ORDERING GUIDE

Model

Temperature Range

Accuracy

Option*

AD2S105AP

–40

°C to +85°C

30 arc min

P-44A

*P = Plastic Leaded Chip Carrier.

AD2S105AP датащи(PDF) 3 Page - Analog Devices

AD2S105AP датащи(HTML) 3 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

датащи скачать

ссылки URL