поискавой системы для электроныых деталей
  Russian  ▼
ALLDATASHEETRU.COM

X  

RT8167A датащи(PDF) 39 Page - Richtek Technology Corporation

номер детали RT8167A
подробное описание детали  Dual Single-Phase PWM Controller for CPU Core/GFX Power Supply
PDF  40 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
производитель  RICHTEK [Richtek Technology Corporation]
домашняя страница  http://www.richtek.com
Logo RICHTEK - Richtek Technology Corporation

RT8167A датащи(HTML) 39 Page - Richtek Technology Corporation

Back Button RT8167A Datasheet HTML 32Page - Richtek Technology Corporation RT8167A Datasheet HTML 33Page - Richtek Technology Corporation RT8167A Datasheet HTML 34Page - Richtek Technology Corporation RT8167A Datasheet HTML 35Page - Richtek Technology Corporation RT8167A Datasheet HTML 36Page - Richtek Technology Corporation RT8167A Datasheet HTML 37Page - Richtek Technology Corporation RT8167A Datasheet HTML 38Page - Richtek Technology Corporation RT8167A Datasheet HTML 39Page - Richtek Technology Corporation RT8167A Datasheet HTML 40Page - Richtek Technology Corporation  
Zoom Inzoom in Zoom Outzoom out
 39 / 40 page
background image
RT8167A
39
DS8167A-00
January 2012
www.richtek.com
©
Copyright
2012 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
Keep the high current paths short, especially at the
ground terminals.
Keep the power traces and load connections short. This
is essential for high efficiency.
When trade-offs in trace lengths must be made, it's
preferable to allow the inductor charging path to be made
longer than the discharging path.
Place the current sense component close to the
controller. ISENxP and ISENxN connections for current
limit and voltage positioning must be made using Kelvin
sense connections to guarantee the current sense
accuracy. The PCB trace from the sense nodes should
be parallel to the controller.
Route high-speed switching nodes away from sensitive
analog areas (COMPx, FBx, ISENxP, ISENxN, etc...)
Special attention should be paid in placing the DCR
current sensing components. The DCR current sensing
capacitor and resistors must be placed close to the
controller.
The capacitor connected to the ISEN1N/ISENAN for noise
decoupling is optional and it should also be placed close
to the ISEN1N/ISENAN pin.
The NTC thermistor should be placed physically close
to the inductor for better DCR thermal compensation.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40


датащи скачать

Go To PDF Page


ссылки URL



Вашему бизинису помогли Аллдатащит?  [ DONATE ] 

Что такое Аллдатащит   |   реклама   |   контакт   |   Конфиденциальность   |   Ссылка на техническое описание    |   обмен ссыками   |   поиск по производителю
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com