Data Sheet No. PD 10064 revC

Series PVN012APbF

Microelectronic Power IC

Single Pole, Normally Open, 0-20V, 4.0AAC/ 6.0A DC

General Description

The PVN012A Series Photovoltaic Relay at 50

milliohms features the lowest possible on-state

resistance in a miniature package — lower than a

comparable reed relay.

The PVN012A is a single-pole, normally open solid-

switch, driven by an integrated circuit photovoltaic

generator of novel construction. The output switch is

controlled by radiation from a GaAlAs light emitting

diode (LED) which is optically isolated from the

photovoltaic generator.

These units exceed the performance capabilities of

electromechanical relays in life, sensitivity, stable on-

resistance, miniaturization, magnetic insensitivity and

ruggedness. They are ideally suited for switching

high currents or low level signals without distortion

or injection of electrical noise.

Series PVN012A relays are packaged in a

6-lead molded DIP package with either thru-hole or

surface mount (gull-wing) terminals. They are avail-

able in standard plastic shipping tubes or on tape-

and-reel. Please refer to part identification information.

Applications

§ Portable Electronics

§ Computers and Peripheral Devices

§ Audio Equipment

§ Power Supplies and Power Distribution

§ Instrumentation

Part Identification

PVN012APbF

Thru-hole

PVN012ASPbF

Surface-mount

PVN012AS-TPbF

Surface-mount, tape

and reel

(HEXFET is the registered trademark for International Rectifier Power MOSFETs)

Features

§ 50m

W On-Resistance

§ Bounce-free Operation

§ 4.0 - 6.0 Amp Capacity

§ Linear AC/DC Operation

§ 4,000 V

§ Solid-State Reliability

§ UL Recognized

§ ESD Tolerance:

4000V Human Body Model

500V Machine Model

www.irf.com

1

PDF created with pdfFactory trial version www.pdffactory.com