PIC16F610 datasheet(16/20 Pages) MICROCHIP

16 / 20 page

LED Lighting Solutions Design Guide

www.microchip.com/lighting

LED Lighting Solutions

■ EUI-48™ and EUI-64™ enabled MAC address chips along

with Serial EEPROM functionality

■ A broad range of development tools to enhance the user’s

experience

Development Tools

DM320004 – PIC32 Ethernet Starter Kit

AC164123 – Ethernet PICtail™ Plus Daughter Board

AC164121 – Ethernet PICtail™ Daughter Board

DM240001 – Explorer 16 Development Board

DM163024 – PICDEM.net ™ 2 Development Board

Web Link

www.microchip.com/ethernet

CAN and LIN Protocols

Both the CAN and LIN protocols were originally created

for the automotive market. CAN was designed as a high

reliability and speed protocol (up to 1 Mbit/s) for the harsh

environment of the car electrical bus. LIN was later added

as a simple low cost alternative for the control of non-critical

modules on a vehicle. Both find occasional applications in

lighting.

Many of the PIC18F, PIC24H, PIC32 microcontrollers and

dsPIC DSCs include a complete CAN serial interface. The

MCP25XX series of peripheral interfaces includes several

CAN transceiver and CAN I/O expander devices.

All PIC microcontroller devices offering an EUSART module

(PIC18F devices and most recent PIC16F devices) offer

direct support for LIN bus connectivity with auto-baud rate

detection and specific low power features.

Automotive Ambient Lighting Module

Reference Design (APGRD004)

The Automotive Ambient Interior Lighting

Module Reference Design demonstrates

microcontroller-based control of RGB LED

devices. This module can be controlled

remotely by a master body controller via

a LIN bus. These modules are offered in a very compact

form-factor board and are comprised of a PIC12F615 MCU,

an MCP2021 LIN transceiver/voltage regulator, and RGB

LED. LIN commands are interpreted by the module to control

color mixing (16,383 colors) and intensity (1023 levels).

The kit ships with 4 modules to assign as lighting zones in

a LIN or J2602 network. These modules can also be used in

conjunction with the APGDT001 LIN Serial Analyzer to quickly

create a working LIN network straight out of the box.

Development Tools

DM163005 – PICDEM LIN Demonstration Board

DM163011 – PICDEM CAN-LIN 2 Demonstration Board

APGDT001 – LIN Serial Analyzer Tool

APGRD004 – Ref Design, Automotive Ambient Lighting

Literature on the Web

■ AN829 – LightKeeper Automotive Lighting Control

Module, DS00829

Web Links

www.microchip.com/can

www.microchip.com/lin

USB Interface

With the demise of the serial port, any application that

requires a connection with a personal computer has now

to be routed to the USB port. Some innovative lighting

applications occasionally require such a connection to be

established. Several models of PIC18F microcontrollers

incorporate a complete USB interface. Several interface

examples are offered to the designer to simplify the

transition from serial port to USB and to integrate the

application with existing Microsoft Windows®drivers.

Development Tools

DM163025 – PICDEM FS-USB Demonstration Board

DM320003-2 – PIC32 USB Starter Kit II

Web Link

www.microchip.com/usb

Ethernet Interface

Ethernet connectivity is becoming ubiquitous and most new

office and industrial building are being wired for Ethernet. As

lower cost solutions are becoming available it is increasingly

tempting to use Ethernet for even the simplest control and

diagnostic applications.

Microchip addresses the growing demand for a small

and low-cost embedded Ethernet solution by offering the

following:

■ PIC32MX6XX and PIC32MX7XX families with integrated

10/100 Ethernet MAC, dedicated DMA interface supports

packet scatter/gather for outstanding low CPU-overhead

performance at full 100 Megabit/seconds. Industry

standard RMII/MII interface, pre-programmed unique

MAC address. This family is fully compatible with

10/100/1000 Base-T networks

■ 10/100 Base-T ENC624J600 standalone Ethernet

controllers which are IEEE 802.3 compliant, integrated

with hardware cryptographic security engines and factory

preprogrammed unique MAC address. This family is fully

compatible with 10/100/1000 Base-T networks

■ 10 Base-T ENC28J60 standalone Ethernet controller and

the PIC18F97J60 family, which are IEEE 802.3 compliant

and fully compatible with 10/100/1000 Base-T networks

■ Free licensed and robust TCP/IP stack, which is optimized

for the PIC18, PIC24 and PIC32 microcontroller and dsPIC

digital signal controller families

MCU

INT, WOL

Ethernet Interface Controller

PIC16F610 датащи(PDF) 16 Page - Microchip Technology

PIC16F610 датащи(HTML) 16 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

датащи скачать

ссылки URL