PCM2704C, PCM2705C

PCM2706C, PCM2707C

SBFS036A – AUGUST 2011 – REVISED JULY 2012

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

ORDERING INFORMATION

For the most current specification and package information, refer to the Package Option Addendum located at

the end of this data sheet or see the respective device product folders at www.ti.com.

ABSOLUTE MAXIMUM RATINGS

(1)

Over operating free-air temperature range unless otherwise noted.

VALUE

UNIT

–0.3 to 6.5

V

Supply voltage

–0.3 to 4

V

Supply voltage differences

±0.1

V

Ground voltage differences

PGND, AGNDL, AGNDR, DGND, ZGND

±0.1

V

HOST

–0.3 to 6.5

V

D+, D–, HID0/MS, HID1/MC, HID2/MD, XTI, XTO, DOUT,

Digital input voltage

SSPND, CK, DT, PSEL, FSEL, TEST, TEST0, TEST1,

V

FUNC0, FUNC1, FUNC2, FUNC3

V

Analog input voltage

V

V

Input current (any pins except supplies)

±10

mA

Ambient temperature under bias

–40 to +125

°C

Storage temperature

–55 to +150

°C

Junction temperature

+150

°C

Package temperature (IR reflow, peak)

+260

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

RECOMMENDED OPERATING CONDITIONS

Over operating free-air temperature range.

MIN

NOM

MAX

UNIT

4.35

5

5.25

Supply voltage

V

3

3.3

3.6

Digital input logic level

TTL-compatible

Digital input clock frequency

11.994

12

12.006

MHz

Analog output load resistance

16

32

Ω

Analog output load capacitance

100

pF

Digital output load capacitance

20

pF

–25

85

°C

2

Submit Documentation Feedback

Copyright © 2011–2012, Texas Instruments Incorporated

Product Folder Link(s): PCM2704C PCM2705C PCM2706C PCM2707C