SC667201MMG2 datasheet(48/120 Pages) FREESCALE

48 / 120 page

7 See Table 4 for details on pad types.

8 The Status During Reset pin is sampled after the internal POR is negated. Prior to exiting POR, the signal has a high impedance. Terminology is O (output),

I (input), Up (weak pull up enabled), Down (weak pull down enabled), Low (output driven low), High (output driven high). A dash for the function in this column

denotes that both the input and output buffer are turned off. The signal name to the left or right of the slash indicates the pin is enabled.

9 When used as ETRIG, this pin must be configured as an input. For GPIO it can be configured either as an input or output.

10 Maximum frequency is 50 kHz

11 PCR219 controls two different pins: MCKO and GPIO[219]. Please refer to Pad Configuration Register 219 section in SIU chapter of device reference manual

for details.

12 On 176 LQFP and 208 MAPBGA packages, this pin is tied low internally.

13 These pins are selected by asserting JCOMP and configuring the NPC. SIU values have no effect on the function of this pin once enabled.

14 The BAM uses this pin to select if auto baud rate is on or off.

15 Output only

16 This signal name is used to support legacy naming.

17 Do not use VRC33 to drive external circuits.

18 VDDEH1A, VDDEH1B and VDDEH1AB are shorted together in all production packages. The separation of the signal names is present to support legacy

naming, however they should be considered as the same signal in this document.

19 VDDEH4, VDDEH4A, VDDEH4B and VDDEH4AB are shorted together in all production packages. The separation of the signal names is present to support

legacy naming, however they should be considered as the same signal in this document.

20 VDDEH6, VDDEH6A, VDDEH6B and VDDEH6AB are shorted together in all production packages. The separation of the signal names is present to support

legacy naming, however they should be considered as the same signal in this document.

21 VDDEH7, VDDEH7A and VDDE7B are shorted together in all production packages. The separation of the signal names is present to support legacy naming,

however they should be considered as the same signal in this document.

SC667201MMG2 датащи(PDF) 48 Page - Freescale Semiconductor, Inc

SC667201MMG2 датащи(HTML) 48 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL