AM1808 datasheet(63/262 Pages) TI

63 / 262 page

AM1808

www.ti.com

SPRS653C

– FEBRUARY 2010 – REVISED DECEMBER 2011

Device Operating Conditions

4.1

Absolute Maximum Ratings Over Operating Junction Temperature Range

(Unless Otherwise Noted)

(1)

Core Logic, Variable and Fixed

-0.5 V to 1.4 V

(CVDD, RVDD, RTC_CVDD, PLL0_VDDA , PLL1_VDDA ,

SATA_VDD, USB_CVDD ) (2)

I/O, 1.8V

-0.5 V to 2 V

Supply voltage ranges

(USB0_VDDA18, USB1_VDDA18, SATA_VDDR, DDR_DVDD18) (2)

I/O, 3.3V

-0.5 V to 3.8V

(DVDD3318_A, DVDD3318_B, DVDD3318_C, USB0_VDDA33,

USB1_VDDA33) (2)

Oscillator inputs (OSCIN, RTC_XI), 1.2V

-0.3 V to CVDD + 0.3V

Dual-voltage LVCMOS inputs, 3.3V or 1.8V (Steady State)

-0.3V to DVDD + 0.3V

Dual-voltage LVCMOS inputs, operated as 3.3V (Transient)

DVDD + 20%

up to 20% of Signal

Period

Input voltage (VI) ranges

Dual-voltage LVCMOS inputs, operated as 1.8V (Transient)

DVDD + 30%

up to 30% of Signal

Period

USB 5V Tolerant IOs:

5.25V(3)

(USB0_DM, USB0_DP, USB0_ID, USB1_DM, USB1_DP)

USB0 VBUS Pin

5.50V(3)

Dual-voltage LVCMOS outputs, 3.3V or 1.8V

-0.5 V to DVDD + 0.3V

(Steady State)

Dual-voltage LVCMOS outputs, operated as 3.3V

DVDD + 20%

(Transient)

up to 20% of Signal

Output voltage (VO) ranges

Period

Dual-voltage LVCMOS outputs, operated as 1.8V

DVDD + 30%

(Transient)

up to 30% of Signal

Period

Input or Output Voltages 0.3V above or below their respective power

±20mA

Clamp Current

rails. Limit clamp current that flows through the I/O's internal diode

protection cells.

Operating Junction Temperature ranges,

Commercial (default)

°C to 90°C

Storage temperature range, Tstg

(default)

-55

°C to 150°C

Human Body Model (HBM) (5)

>1000 V

ESD Stress Voltage, VESD

(4)

Charged Device Model (CDM) (6)

>500 V

(1)

Stresses beyond those listed under

"absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under

"recommended operating

conditions

" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values are with respect to VSS, USB0_VSSA33, USB0_VSSA, PLL0_VSSA, OSCVSS, RTC_VSS

(3)

Up to a maximum of 24 hours.

(4)

Electrostatic discharge (ESD) to measure device sensitivity/immunity to damage caused by electrostatic discharges into the device.

(5)

Level listed above is the passing level per ANSI/ESDA/JEDEC JS-001-2010. JEDEC document JEP 155 states that 500V HBM allows

safe manufacturing with a standard ESD control process, and manufacturing with less than 500V HBM is possible if necessary

precautions are taken. Pins listed as 1000V may actually have higher performance.

(6)

Level listed above is the passing level per EIA-JEDEC JESD22-C101E. JEDEC document JEP 157 states that 250V CDM allows safe

manufacturing with a standard ESD control process. Pins listed as 250V may actually have higher performance.

Device Operating Conditions

Submit Documentation Feedback

Product Folder Link(s): AM1808

AM1808 датащи(PDF) 63 Page - Texas Instruments

AM1808 датащи(HTML) 63 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL