12

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

12 - 119

Absolute Maximum Ratings

Outline Drawing

Bias Voltage Range (Vdd)

+8.0 Vdc

Control Voltage Range

(All Logic Lines)

Vdd +0.5 to -0.2V Vdc

Channel Temperature

150 °C

Thermal Resistance

325 °C/W

Storage Temperature

-65 to +150 °C

Operating Temperature

-40 to +85 °C

Maximum Input Power (Each Input)

+23 dBm (200 - 2150 MHz)

NOTES:

1. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS].

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

4. PAD BURR LENGTH SHALL BE 0.15mm MAX.

PAD BURR HEIGHT SHALL BE 0.05mm MAX.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL NC LEADS, GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED

TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

Part Number

Package Body Material

Lead Finish

MSL Rating

Package Marking

[3]

HMC596LP4

Low Stress Injection Molded Plastic

Sn/Pb Solder

MSL1

[1]

H596

XXXX

HMC596LP4E

RoHS-compliant Low Stress Injection Molded Plastic

100% matte Sn

MSL1

[2]

H596

XXXX

[1] Max peak reflow temperature of 235 °C

[2] Max peak reflow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information

HMC596LP4 / 596LP4E

v01.0409

SMT CMOS 4x2 SWITCH

MATRIX, 0.2 - 3.0 GHz