GP2L09/GP2L24/GP2L26

s Precautions for Use

Ethyl alcohol, Methyl alcohol, Isopropyl alcohol, Freon TE, Freon TF, Diflon solvent S3-E

When the cleaning solvents except for specified materials are used, please consult us.

( 3) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.

However, do not perform the above cleaning using a soft cloth with cleaning solvent in the

marking portion.

In this case, use only the following type of cleaning solvent used for wiping off:

( 1) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01

µ F bet-

ween Vcc and GND near the device.

( 2) In this product, the PWB is fixed with a resin cover, and cleaning solvent may remain inside

the case; therefore, dip cleaning or ultrasonic cleaning are prohibited.

( 4) As for other general cautions, refer to the chapter “ Precautions for Use ” .