IDC Sockets for Discrete Wires

XG5

69

XG5 Accessories

■ Top Lock Levers

■ Spare Contacts

Contact Removal Tool

XY2E-0001

Used to remove contacts, which need to be replaced or reconfigured,

from the housing.

Replacing Contacts

Use only this tool to remove incorrect IDC contacts.

1. Remove the cover.

2. Insert the tool into the housing lance holes and push the lance

into the housing.

3. Pull out the contact while holding the lance down.

4. Insert a new contact.

■ XG5 IDC Assembly Tools

See the “XG

@ - Assembly Tooling and Accessories” datasheet for details regarding manual and automated IDC Termination tools (part numbers

XY2B-7006 and XY2B-2104-N)

Material: Polyamide resin

(UL94V-2)/natural

Material: Polyamide resin

(UL94V-2)/natural

XG5Z-0002 - “Lock Lever”

Use to lock unshrouded right-angle Plugs (XG8B and XG8W) to

XG5 or XG4 mating sockets.

XG4Z-0002 - “Lock Lever II”

Use to lock XG4C Box-type Plugs.

Mounting the Lock Lever

For Sockets with polarity guides, mount the

Lock Lever to the tab to lock the Socket to the

Unshrouded Plug as shown in the diagram on

the right.

Model

XG5Z-0002

XG4Z-0002

Size no.

Note: 1. These Contacts can be used as re-

placements if a wrong connection

is made.

2. The applicable wire for size No. 1 is

AWG24 (UL-1061). The applicable

wire for size No. 2 is AWG26 to

AWG28 (UL-1007).

Model

XG5W-0031-N

XG5W-0034-N

Contact

Removal Tool

XY2E-0001

Lance hole

Housing