FEATURES / BENEFITS

RoHS compliant

High brightness with low current draw - uses up to 90%

less energy than incandescent

Long life - up to 100K hours

No heat generated

Mounts directly into industry-standard socket

Resistant to shock and vibration

AlInGaP and InGaN technology

Super bright single chip design

Colors include red, green, yellow, blue and white

Dialight's line of based LED lamps is designed to directly

replace many popular subminiature and miniature incandescent

lamps. The benefits of LED technology over incandescent are

significant: They offer long life, are shock resistant, withstand

vibration and provide energy conservation.

586 Series

Single Chip BASED LED

T1 3/4 BI-PIN

SPECIFICATIONS

Operating Voltages: 6, 14, and 28 VDC

Replaces incandescent lamp numbers*: 2314,

2323, 2324, 2325, 2335, 2337, 2342, 7327, 7328,

7330, 7349, 7377, 7380, 7381, 7382, 7387, 7876,

and 7945

*See Dialight’s Incandescent lamp/based LED

cross reference for a complete listing

Dialight Corporation

1501 Route 34 South • Farmingdale, NJ 07727 USA

Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com

CONSIDERATIONS

Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED.

If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses,

which will optimize the light output.

Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced.

Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage.

Dialight does not recommend that based LED lamps be used in neon sockets.

MDEL586R001_C

Measurements are typical

Dimensions are inches [mm]

Dialight reserves the right to make changes at any time

in order to supply the best product possible.

Polarity Indicators