OLED Display Module

96RGBx96 (1.10”) OLED Display

YOS3C

sales@greatecs.com

www.greatecs.com

10

COMMAND APPLICATION EXAMPLE

Command usage and explanation of an actual example

<Initialization>

OLED_VCC_CTL=0;

//Off power up Panel Vcc

OLED_RESET=0;

//Reset driver IC for 100ms

Delay_100ms (1);

OLED_RESET=1;

Set SOFT_RESET (0x01, 0x00);

Set STANDBY_ON_OFF (0x14, 0x00);

Set DISP_ON_OFF (0x02, 0x00);

Set ANALOG CONTROL (0x0F, 0x40);

Set OSC_ADJUST (0x1A, 0x03);

Set DISPLAYSTART_X (0x38, 0x00);

Set DISPLAYSTART_Y (0x39, 0x00);

Set RGB_IF (0xE0, 0x00);

Set RGB_POL (0xE1, 0x00);

Set DISPLAY_MODE_CONTROL (0xE5, 0x00);

Set CPU_IF (0x0D, 0x00);

Set MEMORY_WRITE/READ (0x1D, 0x01);

Set ROW_SCAN_DIRECTION (0x09, 0x00);

Set ROW_SCAN_MODE (0x13, 0x00);

Set COLUMN_CURRENT_R (0x40, 0x7F);

Set COLUMN_CURRENT_G (0x41, 0x65);

Set COLUMN_CURRENT_B (0x42, 0x7B);

Set ROW_OVERLAP (0x48, 0x03);

Set DISCHARGE_TIME (0x18, 0x03);

Set PEAK_PULSE_DELAY (0x16, 0x00);

Set PEAK_PULSE_WIDTH_R (0x3A, 0x03);

Set PEAK_PULSE_WIDTH_G (0x3B, 0x03);

Set PEAK_PULSE_WIDTH_B (0x3C, 0x02);

Set PRECHARGE_CURRENT_R (0x3D, 0x09);

Set PRECHARGE_CURRENT_G (0x3E, 0x09);

Set SCAN_OFF_LEVEL (0x49, 0x0F);

SetDISPLAY_X1(0x30,0x00);

Set DISPLAY_X2 (0x31, 0x5F);

Set DISPLY_Y1 (0x32, 0x00);

Set DISPLAY_Y2 (0x33, 0x5F);

Clear Screen;

Set DISP_ON_OFF (0x02, 0x01);

OLED_VCC=1;

//Power up Vcc

Delay_100ms(1);

//Dealy 100ms

Set_Display_On(0xAF);

// Display On (0x00/0x01)

If the noise is accidentally occurred at the displaying window during the operation,

please reset the display in order to recover the display function.