 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
MIC3003GFL датащи(PDF) 47 Page - Micrel Semiconductor |
|
|
|||||||||||||||||||||||||||||
MIC3003GFL датащи(HTML) 47 Page - Micrel Semiconductor |
|
|
47 / 74 page  Micrel, Inc. MIC3003GFL July 2010 47 M9999-072910-A hbwhelp@micrel.com or (408) 955-1690 Transmitted Optical Power D[7] read-only D[6] read-only D[5] read-only D[4] read-only D[3] read-only D[2] read-only D[1] read-only D[0] read-only Default Value 0000 0000b = 00h (0mW)(4) Serial address A2h Byte address MS byte (TXOPh): 102 = 66h LS byte (TXOPl): 103 = 67h Each LSB of TXOPh represents 25.6 μW, and each LS bit of TXOPl represents 0.1 μW. TXOPh is used in conjunction with TXOPl to yield an unsigned sixteen-bit value. In external calibration mode, the host should process the results using the appropriate slope and offset coefficients. TXOPh contains the eight-bit ADC result and TXOPl is zero. In internal calibration mode, the MIC3003’s ALU applies the coefficients stored in (TXSLPh:TXSLPl) and (TXOFFh:TXOFFl). The TXOP registers will contain valid data after one ADC conversion cycle. Notes: 3. ILDh will contain measured data after one A/D conversion cycle. 4. TXOPh will contain measured data after one A/D conversion cycle. Received Optical Power D[7] read-only D[6] read-only D[5] read-only D[4] read-only D[3] read-only D[2] read-only D[1] read-only D[0] read-only Default Value 0000 0000b = 00h (0mW)(6) Serial address A2h Byte address MS byte (RXOPh): 104 = 68h LS byte (RXOPl): 105 = 69h Each LSB of RXOPh represents 25.6 μW, and each LS bit of RXOPl represents 0.1 μW.RXOPh is used in conjunction with RXOPl to yield an unsigned sixteen-bit value. In external calibration mode, the host should process the results using the appropriate slope and offset coefficients. RXOPh contains the twelve-bit ADC result and the lower four bits of RXOPl are zero. In internal calibration mode, the MIC3003’s ALU applies the coefficients stored in (RXSLP[0-7]h:RXSLP[0-7]l) and (RXOFF[0-7]h:RXOFFl[0-7]). The RXOP registers will contain valid data after one ADC conversion cycle. Control and Status (CNTRL) D[7] TXDIS read-only D[6] STXDIS read/write D[5] RS1S read-only D[4] RS0S read-only D[3] SRS0 read/write D[2] TXFLT read-only D[1] LOS read-only D[0] POR read-only Default value 0000 0000b = 00h Serial address A2h Byte address 110 = 6Eh |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
