GC5330 datasheet(21/49 Pages) TI

21 / 49 page

GC5330

GC5337

www.ti.com

SLWS226 B

– DECEMBER 2010 – REVISED JANUARY 2011

RX ADC Formatter

There are three ADC input ports: two 15-pair LVDS ports (referred to as ports A and B) and one 8-pair LVDS

port (referred to as port C and typically used for the DPD feedback path). Depending on the ADCs selected,

these three ports can accommodate up to 17 ADCs (e.g., using two octals and a single). The formatter block can

route any port to either the capture buffer block or the RX signal processing blocks. The pin connections for the

ADCs are shown in Table 6.

The GC533x works seamlessly with the following TI ADCs.

Single: 5400, 12-bit, 1 GSPS, may need special routing on the PCB.

5463, 12-bit, 500 MSPS, may need clock-to-data-skew special routing on the PCB.

54RF63, 12-bit, 550 MSPS, may need clock-to-data-skew special routing on the PCB.

5474, 14-bit, 400 MSPS, may need clock clock-to-data-skew special routing on the PCB.

5493, 16-bit, 130 MSPS

548x, 16-bit, 80-200 MSPS

612x, 12-bit, 65

–250 MSPS

614x, 14-bit, 65-250 MSPS

58B18, 11-bit, 200 MSPS

414x, 14-bit, 160

–250 MSPS

412x, 12-bit, 160

–250 MSPS

552x, 12-bit, 170

–210 MSPS

554x, 14-bit, 170

–210 MSPS

5517, 11-bit, 200 MSPS

Dual:

62c15, 11-bit, 125 MSPS

62c17, 11-bit, 200 MSPS

58c28, 11-bit, 200 MSPS

62p4x, 14-bit, 65-250 MSPS

62p2x, 12-bit, 65-250 MSPS

624x, 14-bit, 65-125 MSPS

622x, 12-bit, 65-125 MSPS

Quad:

642x, 12-bit, 65

–125 MSPS

644x, 14-bit, 65

–125 MSPS

Octal:

527x, 12-bit, 65 MSPS

528x, 12-bit, 65 MSPS

Submit Documentation Feedback

Product Folder Link(s): GC5330 GC5337

GC5330 датащи(PDF) 21 Page - Texas Instruments

GC5330 датащи(HTML) 21 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

датащи скачать

ссылки URL