2010/08

SOP-8

SSC2000

Series

Power Factor Correction (PFC) Controller IC

of Continuous Conduction Mode (CCM) type,

for High Power-High Efficiency Applications

The SSC2000 series products are power factor correction (PFC) controller ICs of

Continuous Conduction Mode (CCM). The product achieves high power CCM systems,

with few external components and no multiplier by the average current control method.

Continuous Conduction Mode (CCM)

The mode enables the low peak current recommended for high power supplies.

Average Current Control Method

The method requires no input line voltage sensing and no multiplier,

and achieves simple systems with few external components.

Pulse Width Modulation (PWM) + Frequency Modulation Function

The function superposes the modulated frequency according to Duty value, on the internally fixed PWM

frequency of 65 kHz(TYP).

Maximum Duty Cycle : 94% (TYP)

Built-in High Speed Response for Dynamic Load Changes

Error Amplifier Reference Voltage : 3.5V (TYP)

Brown-In / Brown-Out Function

The function enables the oscillation start/stop by externally rated input voltage

and makes protections at low input voltage.

Various Protections

Overvoltage Protection (OVP) -------------------------------- Auto-Restart

Overcurrent Protection (OCP) -------------------------------- Auto-Restart

Two Overcurrent Detection Thresholds : Input Current Limitation (OCPL)

Peak Current Limitation (OCPH)

Output Open Loop Detection (OLD)-------------------------- Auto-Restart

Power Factor Correction Circuits for Middle to High Output Power Applications

AC/DC Power Supplies,

Digital Consumer Equipments; Large Screen LCD-TVs, PDP-TVs, etc.,

OA Equipments; Computers, Severs, Monitors, etc.,

Communication Devices, Others

Product No

Package

SSC2001S

SOP8