test perFOrmed

125°C standard

125°C /es

/883

Class h Qml

Pre-cap Inspection

Method 2017, 2032

yes

yes

yes

Temperature Cycle (10 times)

Method 1010, Cond. C, -65°C to 150°C, ambient

Method 1010, Cond. B, -55°C to 125°C, ambient

no

no

no

yes

yes

no

Constant Acceleration

Method 2001, 3000 g

Method 2001, 500 g

no

no

no

yes

yes

no

Method 1015, 125°C case, typical

96 hours

160 hours

no

no

yes

no

no

yes

Final Electrical Test MIL-PRF-38534, Group A

Subgroups 1 through 6: -55°C, +25°C, +125°C case

Subgroups 1 and 4: +25°C case

no

yes

no

yes

yes

no

Hermeticity Test

Fine Leak, Method 1014, Cond. A

Gross Leak, Method 1014, Cond. C

no

no

yes

yes

yes

no

yes

yes

no

Final visual inspection

Method 2009

yes

yes

yes

Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.

Notes:

1. Standard and /ES, non-QML products, do not meet all of the requirements of MIL-PRF-38534.

2. Burn-in temperature designed to bring the case temperature to +125°C

Crane Aerospace & Electronics Power Solutions

MFL single and dual dc/dc converters

MFL Single and Dual, MFL Rev E - 20101026. This revision supercedes all previous releases. All technical information is believed to be accurate,

but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make changes in products or specifications without notice.

MFL Series is a trademark of Interpoint. Copyright © 1999 - 2010 Interpoint Corporation. All rights reserved. www.craneae.com/interpoint

Page 13 of 13

28 VoLt input – 65 Watt