© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

46

CERAMIC LEADED

PACKAGING INFORMATION

Ceramic Axial

Lead Tape and Reel Packaging

KEMET offers standard reeling of Molded and Conformally

Coated Axial Leaded Ceramic Capacitors for automatic insertion

or lead forming machines per EIA specification RS-296. KEMET’s

internal specification four-digit suffix, 7200, is placed at the end of

the part number to designate tape and reel packaging, ie:

C410C104Z5U5CA7200.

Paper (50 lb.) test minimum is inserted between the layers of

capacitors wound on reels for component pitch

≤ 0.400”.

Capacitor lead length may extend only a maximum of .0625”

(1.59mm) beyond the tapes’ edges. Capacitors are centered in a

row between the two tapes and will deviate only ± 0.031

(0.79mm) from the row center. A minimum of 36” (91.5 cm) leader

tape is provided at each end of the reel capacitors. Universal

splicing clips are used to connect the tape. Standard reel

quantities are shown on page 48.