Data Sheet

8

Rev. 2.0, 2009-02-12

TLE4976-1K

TLE4976L

Specification

3

Specification

3.1

Application Circuit

Input

µC GND

µC

TLE

4976x

GND

4.7 nF

The advantage of the current interface is, that only two wires are necessary to connect the sensor.

At least one series resistor is required to convert the two output states of the Hall sensor from current consumption

to a voltage information.

On state.

If the sensor is operated in an application environment with disturbances on the supply line, an additional series

formula:

Figure 7

Application Circuit

–

–

=