Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed

specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test

conditions.

Note 2: Derate J package 10.0mW/˚C above +25˚C, derate W package 7.1mW/˚C above +25˚C, derate E package 11.5mW/˚C above +25˚C.

Note 3: Power dissipation must be externally controlled at elevated temperatures.

Note 4: Parameter tested go-no-go only.

Note 5: Tested at 50pF guarantees limit at 15pF & 5pF.

Note 6: Tested at 50pF, system capacitance exceeds 5pF to 15pF.

Note 7: Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics. These parts may be dose rate sensitive in a space

environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are guaranteed only for the conditions as specified

in Mil-Std-883, Method 1019.5, Condition A

20163302

FIGURE 1. Logic Symbol

20163303

FIGURE 2. Load Test Circuit for Three-State Outputs

20163304

FIGURE 3. Propagation Delay (Notes 8, 9, 10)

www.national.com

6