2

0250M–PLD–7/10

Atmel ATF22V10B

1.

Description

which utilizes the Atmel proven electrically erasable Flash memory technology. Speeds down to 7.5ns and power

dissipation as low as 10mA are offered. All speed ranges are specified over the full 5V

 10% range for military and

industrial temperature ranges, and 5V

 5% for commercial temperature ranges.

Several low-power options allow selection of the best solution for various types of power-limited applications. Each

of these options significantly reduces total system power and enhances system reliability.

2.

Absolute Maximum Ratings*

3.

DC and AC Operating Conditions

Note:

1. The shaded devices are obsolete

Temperature Under Bias .................-55°C to +125°C

*NOTICE:

Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Note:

1. Minimum voltage is -0.6V DC, which may under-

shoot to -2.0V for pulses of less than 20ns.

Maximum output pin voltage is V

which may overshoot to 7.0V for pulses of less

than 20ns.

Storage Temperature ......................-65°C to +150°C

Voltage on Any Pin with

Respect to Ground .......................... -2.0V to +7.0V(1)

Voltage on Input Pins

with Respect to Ground

During Programming ..................... -2.0V to +14.0V(1)

Programming Voltage with

Respect to Ground ........................ -2.0V to +14.0V(1)

Commercial

Industrial

Military

Operating Temperature

0°C - 70°C

(Ambient)

-40°C - 85°C

(Ambient)

-55°C - 125°C

(Case)

V

5V

 5%

5V

 10%

5V

 10%