74LVC2G53_5

© NXP B.V. 2008. All rights reserved.

Product data sheet

Rev. 05 — 18 June 2008

5 of 23

NXP Semiconductors

74LVC2G53

2-channel analog multiplexer/demultiplexer

8.

Limiting values

[1]

The minimum input voltage rating may be exceeded if the input current rating is observed.

[2]

The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed.

[3]

For TSSOP8 packages: above 55

°C the value of P

For VSSOP8 packages: above 110

°C the value of P

For XSON8, XSON8U and XQFN8U packages: above 45

°C the value of P

9.

Recommended operating conditions

[1]

To avoid sinking GND current from terminal Z when switch current flows in terminal Yn, the voltage drop across the bidirectional switch

must not exceed 0.4 V. If the switch current flows into terminal Z, no GND current will flow from terminal Yn. In this case, there is no limit

for the voltage drop across the switch.

[2]

Applies to control signal levels.

Table 5.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage

−0.5

+6.5

V

input voltage

[1]

−0.5

+6.5

V

input clamping current

−50

-

mA

switch clamping current

-

±50

mA

switch voltage

enable and disable mode

[2]

−0.5

V

switch current

-

±50

mA

supply current

-

100

mA

ground current

−100

-

mA

storage temperature

−65

+150

°C

total power dissipation

[3] -

250

mW

Table 6.

Operating conditions

Symbol

Parameter

Conditions

Min

Max

Unit

supply voltage

1.65

5.5

V

input voltage

0

5.5

V

switch voltage

enable and disable mode

V

ambient temperature

−40

+125

°C

∆t/∆V

input transition rise and fall rate

[2] -

20

ns/V

[2] -

10

ns/V