BRIGHT VIEW

ELECTRONICS CO.,LTD

SMD APPLICATION ( PB FREE SOLDERING )

Apply to BVS-3XX

1XX series.

Description:

(1) Manual soldering (We do not recommend this method strongly.)

(1.1) To prevent cracking,please bake (65

,24hrs)before soldering.

(1.2) Temperature at tip of iron: 250

Max.(25W)

(1.3) It's banned to load any stress on the resin during soldering.

(1.4) Soldering time: 3 sec. Max.(one time only)

(2) Reflow Soldering

(2.3) Never take next process until the component is cooled down to room

temperature after reflow.

(2.5) The recommended reflow soldering profile(measuring on the surface

of the LED resin)is following:

2005 / 10 / 20 - B

(2.2) When soldering,do not put stress on the LEDs during heating.

(2.4) After soldering,do not warp the circuit board.

0.5

/SEC MAX.

245 C MAX.

1

/SEC. MAX.

TIME

TEMPERATURE

210 SEC. MIN.

10 SEC. MAX.

150

217

The reflow temperature 240

~245

is recommended and the soldering temperature

should be not higher than 245

(one time only)

100 SEC. MAX.

50 SEC. MAX.

~75

~25

(2.1) To prevent cracking,please bake (65

,24hrs)before soldering.

217