Flat Cable Connectors for PCBs

XG2

61

Flat Cable Connectors for PCBs

XG2

Ideal for high-density mounting.

IDC design allows for quick termination.

• Part of a total flat cable wiring solution, when used in

conjunction with XG4, XG5 and XG8 sockets and plugs.

• End terminates cable to a PCB or acts as a pass through

for connection to other cables or PCB’s.

• Uses a standard 2.54-mm grid terminal arrangement for

easier design of circuits.

• Terminal Arrangement: standard or reverse.

• Uses UL94V-0 approved insulation material.

• IDC Assembly Tools are available.

XG2 Connectors

■ Terminal Arrangement

The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the

wires and the terminals would be as shown below.

■ Ratings and Characteristics

■ Materials and Finish

■ Applicable Wires

1.27-mm pitch, AWG28, 7-strand flat cable.

• UL2651 (standard cable)

• UL20012 (folding cable)

• UL20028 (color-coded cable)

Cable No.

Cable No.

Cable No.

Cable No.

Cable number arrangement (top view)

Standard Terminal

Arrangement

Reverse Terminal

Arrangement

Rated current

1 A

Rated voltage

250 VAC

Contact resistance

15 m

Ω max. (at 20 mV, 100 mA max.)

Insulation resistance 1,000 M

Ω min. (at 500 VDC)

Dielectric strength

500 VAC for 1 min. (leakage current: 1 mA

max.)

Operating

temperature

−55°C to 85°C (with no icing at low

temperature)

Base

Fiber-glass reinforced PBT resin

(UL94V-0)/black

Contacts

Mating end Copper alloy/nickel base, tin plating

Terminals

Copper alloy/nickel base, tin plating

Cover

Fiber-glass reinforced PBT resin

(UL94V-0)/black