ST8016

Ver 2.0

Page 2/28

2008/05/07

1

FEATURES

n

Number of LCD drive outputs: 160

n

Supply voltage for LCD drive: +15.0 to +30.0 V

n

Supply voltage for the logic system: +2.5 to +5.5 V

n

Low power consumption

n

Low output impedance

(Segment mode)

n

Shift clock frequency

n

Adopts a data bus system

n

4-bit/8-bit parallel input modes are

selectable with a mode (MD) pin

n

Automatic transfer function of an

enable signal

n

Automatic counting function which, in

the chip selection mode, causes the

internal clock to be stopped by

automatically counting 160 bits of input

data

n

Line latch circuits are reset when

/DISPOFF active

(Common mode)

n

Shift clock frequency: 4 MHz (MAX.)

n

Built-in 160-bit bi-directional shift

register (divisible into 80 bits x 2)

n

Available in a single mode (160-bit shift

register) or in a dual mode (80-bit shift

register x 2)

The above 4 shift directions are

pin-selectable

n

Shift register circuits are reset when

/DISPOFF active

2

DESCRIPTION

The ST8016 is a 160-output segment/common driver IC suitable for driving large/medium scale dot

matrix LCD panels, and is used in personal computers/work stations. Through the use of SST

(Super Slim TCP) technology, it is ideal for substantially decreasing the size of the frame section of

the LCD module. The ST8016 is good both as a segment driver and a common driver, and it can

create a low power consuming, high-resolution LCD.