ATmega1284P datasheet(20/468 Pages) ATMEL

номер детали	ATmega1284P

подробное описание детали	8-bit Microcontroller with 16/32/64/128K Bytes In-Sytem Programmable Flash

PDF	468 Pages

Scroll/Zoom	100%

производитель	ATMEL [ATMEL Corporation]

домашняя страница	http://www.atmel.com

Logo

20 / 468 page

8152G–AVR–11/09

ATmega164PA/324PA/644PA/1284P

Figure 7-1.

Program Memory Map

7.3

SRAM Data Memory

Figure 7-2 shows how the ATmega164PA/324PA/644PA/1284P SRAM Memory is organized.

The ATmega164PA/324PA/644PA/1284P is a complex microcontroller with more peripheral

units than can be supported within the 64 location reserved in the Opcode for the IN and OUT

instructions. For the Extended I/O space from $060 - $FF in SRAM, only the ST/STS/STD and

LD/LDS/LDD instructions can be used.

The first 4,352 Data Memory locations address both the Register File, the I/O Memory,

Extended I/O Memory, and the internal data SRAM. The first 32 locations address the Register

file, the next 64 location the standard I/O Memory, then 160 locations of Extended I/O memory

and the next 4,096 locations address the internal data SRAM.

The five different addressing modes for the data memory cover: Direct, Indirect with Displace-

ment, Indirect, Indirect with Pre-decrement, and Indirect with Post-increment. In the Register file,

registers R26 to R31 feature the indirect addressing pointer registers.

The direct addressing reaches the entire data space.

The Indirect with Displacement mode reaches 63 address locations from the base address given

by the Y- or Z-register.

When using register indirect addressing modes with automatic pre-decrement and post-incre-

ment, the address registers X, Y, and Z are decremented or incremented.

Application Flash Section

Boot Flash Section

Program Memory

0x0000

0x1FFF/0x3FFF/0x7FFF/0xFFFF

ATmega1284P датащи(PDF) 20 Page - ATMEL Corporation