ATtiny88 datasheet(153/266 Pages) ATMEL

153 / 266 page

153

8008C–AVR–03/09

ATtiny48/88

• Bits 1..0 – TWPS: TWI Prescaler Bits

These bits can be read and written, and control the bit rate prescaler.

To calculate bit rates, see “Bit Rate Generator Unit” on page 130. The value of TWPS1..0 is

used in the equation.

15.9.4

TWDR – TWI Data Register

In Transmit mode, TWDR contains the next byte to be transmitted. In Receive mode, the TWDR

contains the last byte received. It is writable while the TWI is not in the process of shifting a byte.

This occurs when the TWI Interrupt Flag (TWINT) is set by hardware. Note that the Data Regis-

ter cannot be initialized by the user before the first interrupt occurs. The data in TWDR remains

stable as long as TWINT is set. While data is shifted out, data on the bus is simultaneously

shifted in. TWDR always contains the last byte present on the bus, except after a wake up from

a sleep mode by the TWI interrupt. In this case, the contents of TWDR is undefined. In the case

of a lost bus arbitration, no data is lost in the transition from Master to Slave. Handling of the

ACK bit is controlled automatically by the TWI logic, the CPU cannot access the ACK bit directly.

• Bits 7..0 – TWD: TWI Data Register

These eight bits constitute the next data byte to be transmitted, or the latest data byte received

on the 2-wire Serial Bus.

15.9.5

TWAR – TWI (Slave) Address Register

The TWAR should be loaded with the 7-bit Slave address (in the seven most significant bits of

TWAR) to which the TWI will respond when programmed as a Slave Transmitter or Receiver,

and not needed in the Master modes. In multi master systems, TWAR must be set in masters

which can be addressed as Slaves by other Masters.

The LSB of TWAR is used to enable recognition of the general call address (0x00). There is an

associated address comparator that looks for the slave address (or general call address if

enabled) in the received serial address. If a match is found, an interrupt request is generated.

• Bits 7..1 – TWA: TWI (Slave) Address Register

These seven bits constitute the slave address of the TWI unit.

Table 15-7.

TWI Bit Rate Prescaler

TWPS1

TWPS0

Prescaler Value

001

014

1016

1164

Bit

654

TWD7

TWD6

TWD5

TWD4

TWD3

TWD2

TWD1

TWD0

TWDR

Read/Write

R/W

Initial Value

Bit

TWA6

TWA5

TWA4

TWA3

TWA2

TWA1

TWA0

TWGCE

TWAR

Read/Write

R/W

Initial Value

ATtiny88 датащи(PDF) 153 Page - ATMEL Corporation

ATtiny88 датащи(HTML) 153 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL