ATmega32HVB datasheet(4/22 Pages) ATMEL

номер детали	ATmega32HVB

подробное описание детали	8-bit Microcontroller with 16K/32K Bytes In-System Programmable Flash

PDF	22 Pages

Scroll/Zoom	100%

производитель	ATMEL [ATMEL Corporation]

домашняя страница	http://www.atmel.com

Logo

4 / 22 page

8042A–AVR–07/09

ATmega16HVB/32HVB

1.2.13

PPI/NNI

Unfiltered positive/negative input from external current sense resistor, used by the battery pro-

tection circuit, for over-current and short-circuit detection. For details, see ”Battery Protection” on

page 133.

1.2.14

NV/PV1/PV2/PV3/PV4

NV, PV1, PV2, PV3, and PV4 are the inputs for battery cells 1, 2, 3 and 4, used by the Voltage

ADC to measure each cell voltage. For details, see ”Voltage ADC – 7-channel General Purpose

12-bit Sigma-Delta ADC” on page 116.

1.2.15

PVT

Defines the source voltage level for the Charge FET driver. For details, see ”FET Driver” on

page 145.

1.2.16

BATT

Input for detecting when a charger is connected. Defines the source voltage level for the Dis-

charge FET driver. For details, see ”FET Driver” on page 145.

1.2.17

RESET/dw

Reset input. A low level on this pin for longer than the minimum pulse length will generate a

reset, even if the clock is not running. The minimum pulse length is given in Table 11 on page

38. Shorter pulses are not guaranteed to generate a reset. This pin is also used as debugWIRE

communication pin.

ATmega32HVB датащи(PDF) 4 Page - ATMEL Corporation