1

Motorola Thyristor Device Data

Advance Information

Sensitive Gate Triacs

Silicon Bidirectional Thyristors

. . . designed primarily for full-wave ac control applications, such as light dimmers,

motor controls, heating controls and power supplies; or wherever full-wave silicon

gate controlled solid-state devices are needed. Triac type thyristors switch from a

blocking to a conducting state for either polarity of applied anode voltage with positive

or negative gate triggering.

• Sensitive Gate Triggering (A and B versions) Uniquely Compatible for Direct

Coupling to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit Logic

Functions

• Gate Triggering 4 Mode — MAC6071A,B, MAC6073A,B, MAC6075A,B

• Blocking Voltages to 600 Volts

• All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity

and Stability

• Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat

Dissipation and Durability

Rating

Symbol

Value

Unit

Peak Repetitive Off-State Voltage(1)

(Gate Open, TJ = 25 to 110°C)

MAC6071A,B

MAC6073A,B

MAC6075A,B

VDRM

200

400

600

Volts

On-State Current RMS (TC = 85°C)

IT(RMS)

4

Amps

Peak Surge Current (One Full cycle, 60 Hz, TJ = –40 to +110°C)

ITSM

30

Amps

Circuit Fusing Considerations (t = 8.3 ms)

I2t

3.7

A2s

Peak Gate Power

PGM

10

Watts

Average Gate Power

PG(AV)

0.5

Watt

Peak Gate Voltage

VGM

5

Volts

Operating Junction Temperature Range

TJ

–40 to +110

°C

Storage Temperature Range

Tstg

–40 to +150

°C

Mounting Torque (6-32 Screw)(2)

—

8

in. lb.

1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the

voltage ratings of the devices are exceeded.

2. Torque rating applies with use of compression washer (B52200F006). Mounting torque in excess of 6 in. lb. does not appreciably lower

case-to-sink thermal resistance. Main terminal 2 and heatsink contact pad are common.

For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200

°C, for 10 seconds.

Consult factory for lead bending options.

This document contains information on a new product. Specifications and information herein are subject to change without notice.

Preferred devices are Motorola recommended choices for future use and best overall value.

Order this document

by MAC6071/D

MOTOROLA

SEMICONDUCTOR TECHNICAL DATA

MAC6071A,B

MAC6073A,B

MAC6075A,B

CASE 77-08

(TO-225AA)

STYLE 5

TRIACs

4 AMPERES RMS

200 thru 600 VOLTS

*Motorola preferred devices

MT1

G

MT2

MT1

MT2

G

MT2

*

*

*