•

North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

•

India Tel: +91.80.43537383

•

China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

1

CATV Amplifier Splitter Module

50 - 860 MHz

RoHS Compliant

Rev. V1

MAMUCT0021

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Low Noise Figure

• Low Distortion

• Multifunction Integration

• Single Positive Supply

• 75 ohm Impedance

• Lead-Free Surface Mount Package

• Electroless Nickel Imersion Gold (ENIG) Finish

• 260°C Reflow Compatible

• RoHS* Compliant Version of MAMUSS0007

Description

M/A-COM’s MAMUCT0021 is an integrated module

consisting of an amplifier and two equal split power

dividers. The push-pull, low distortion, amplifier

includes the baluns and DC bias circuitry.

The

device is ideally suited for use in the CATV market

where low noise figure, low distortion and high

linearity are required.

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Ordering Information

Part Number

Package

MAMUCT0021TR

500 Piece Reel

MAMUCT0021SMB

Sample Test Board (Includes 5 Samples)

Parameter

Absolute Maximum

Input Power

+20 dBm

Operating Voltage

+10 volts

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

1. Exceeding any one or combination of these limits may cause

permanent damage to this device.

2. M/A-COM does not recommend sustained operation near

these survivability limits.

Pin Configuration

Functional Schematic

Pin No.

Pin Name

Description

1

GND

Ground

2

GND

Ground

3

GND

Ground

4

GND

Ground

5

GND

Ground

6

GND

Ground

7

GND

Ground

8

GND

Ground

9

IN

RF Input

10

GND

Ground

11

+5V

12

GND

Ground

13

OUT 1

RF Output 1

14

GND

Ground

15

OUT 2

RF Output 2

16

GND

Ground

17

OUT 3

RF Output 3

18

GND

Ground

IN

OUT1

OUT3

OUT2

Vdd

IN

OUT1

OUT3

OUT2

Vdd