• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

Low Cost SMT Dual Band Diplexer

AMPS/PCS and GSM/DCS

Rev. V3

DP52-0002

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Units

Min

Typ

Max

Passband Insertion Loss

dB

—

0.5

0.8

Stopband Isolation

dB

12

18

—

Passband VSWR

—

—

1.4:1

1.7:1

Parameter

Units

Min

Typ

Max

Passband Insertion Loss

dB

—

0.5

0.9

Stopband Isolation

dB

12

18

—

Passband VSWR

—

—

1.5:1

1.8:1

Recommended PCB Configuration

Absolute Maximum Ratings

3,4

Parameter

Absolute Maximum

Input Power

2W CW

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

3.

Exceeding any one or combination of these limits may

cause permanent damage to this device.

4.

M/A-COM does not recommend sustained operation near

these survivability limits.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

GMIC

Circuits

are

sensitive

to

electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these devices.